First, the features of the Rek electric pruning shears
1. No sharpening blades, durable.
2. Low noise, good fatigue resistance, and each battery can work continuously for 3 to 4 hours.
3. It can be widely used in various fruit tree garden production areas.
4. Reducing the labor intensity of production (scissors usage) workers is also a new measure to strengthen labor protection.
The production efficiency of electric scissors is 2 to 3 times that of traditional manual scissors, thereby reducing the number of workers and lowering production costs.
6. It is flexible in use, turns freely, is safe and reliable, easy to maintain, and the operation of blade replacement is convenient.
Second, Operating instructions
1. Do not cut branches that exceed the working range of the scissors. Do not cut hard objects such as metal, stone or other non-plant materials to avoid damaging the machine.
During the shearing process, if the shearing blade gets stuck on a branch, the cutting edge will automatically stop shearing. Just gently shake it to get rid of the sticking between the shearing blade and the branch.
3. If the scissor blades are worn or damaged, please replace them in time.
When pruning branches, do not cut vertically. Instead, cut the blade diagonally along the branches to ensure smooth cutting and extend their service life.
5. The equipment should be kept clean. When cleaning, use a clean cloth to clean the electric pruning shears, batteries and chargers (do not use any corrosive or solvent-based cleaners). Use a soft brush or dry cloth to clean the dust on the shears' heads.
6. Do not immerse electric pruning shears, batteries, chargers, etc. in water or any other liquid.
7. Please use the equipment correctly in accordance with the instructions. Do not use it when the electric pruning shears, batteries or chargers are damaged.
8. Do not use the electric pruning shears if the switch cannot be properly connected or turned off.
9. Ensure that the electric pruning shears are always turned off when making any adjustments, replacing accessories or storing them.
When using electric pruning shears and their accessories, it is necessary to follow the usage instructions and methods. Personnel who are not familiar with the operation of electric pruning shears and have not received training are prohibited from using them.
11. When in use, do not touch the scissors blades or other parts with your hands to prevent your fingers from being cut or causing other injuries.
12. Do not use in rainy or snowy weather to avoid circuit damage and safety accidents.
Third, common causes of faults and maintenance methods
If the battery cannot be charged normally, it may be due to a mismatch between the battery and the charger or a voltage issue. First, check if the battery charger is the one that comes with the product. Then, pay attention to whether the charging voltage is consistent with the voltage indicated on the nameplate. If there is a problem, replace the charger or adjust the voltage in time.
When an object that cannot be cut is accidentally placed into the cut, the moving blade will close and cannot be operated. At this time, the trigger should be released immediately, and the moving blade will automatically return to the open state.
When the branch being cut is too hard, the moving blade may also close as mentioned above. The solution is also to release the trigger.
Fourth, maintenance and upkeep
When maintaining the pruning shears, the power supply must be turned off.
2. Before each operation, fully charge the power battery and keep it on standby.
3. After each use, wipe the shearing knife with a damp cleaning cloth and apply anti-rust oil on it. If the blade is not sharp and becomes blunt, you can use a whetstone to sharpen the edge of the shearing blade.
4. If the shearing moving knife is severely worn and can no longer be used, it should be replaced in time. The sequence of operation steps is as follows: Remove the front cover, unscrew the large nut, take out the large screw, remove the old shearing knife, replace it with a new one, and lock the large nut (after tightening the large nut to the bottom, retract it by 1/4 turn to prevent the upper and lower knives from contacting too tightly).
5. Reinforce all the fastening screws regularly every week to ensure safety.
6. Only professionals designated by the manufacturer are allowed to disassemble this product.
7. Keep out of reach of children at all times to avoid danger.
8. If it is not used for a long time, the power battery should be fully charged before storage to prevent the battery from discharging by itself and becoming unusable.
When not in use for a long time, the surface of the scissors should be cleaned, anti-rust oil should be applied to the shearing blades, and they should be stored in a dry indoor environment that is resistant to pressure, moisture and sunlight. They must not be placed directly on the ground.
